Abus FU9001 Privest Wireless Alarm Base Set Installatio Uživatelský manuál stáhnout pdf (Strana 73)

7-73

7. Confirm the Write menu option with and your alarm system waits for a signal from your sounder. Send

a message from the sounder.

8. Insert all batteries in the sounder. Press the Reset key for five seconds. Then press the lid contact of the

sounder and keep it pressed until the system receives the signal. You see the following on the display:

9. Press

or to select whether the sounder is to be monitored or not, and confirm your selection

with

The sounder is now ready for operation.

10. The following menu has four menu options:

• Skip: Select another sounder.

• (Re) Write: Train another sounder instead of the already sounder.

• Delete: Delete a sounder.

• Supervision: Change the setting for monitoring the sounder.

7.9.2

Parameter

Under this menu option, you can change the sounder settings. You can change the following settings:

• Volume

• Flash frequency (external sounders only)

To access the Parameter menu:

1. Select the Siren menu.

2. Under Sirene, press

to access the Parameter menu option. You see the following on the display:

3. Press

to select the sounder whose settings you want to change and confirm with . You can now

choose between the settings for the volume and the flash frequency (external sounders only).

4. Select Volume and confirm with

. You see the following on the display:

5. You can now set the volume for the following signals:

• Entry/exit signal

• Alarm signal

• Acknowledgement signal

6. Confirm with

and enter the new volume on the keypad of the system. The setting means:

• 0: Off

• 1: Quiet

• 9: Loud

Enter the volume for the other signals in the same way. You can then set the flash frequency for the external sounder.

Press

to exit the menu option.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 95 96

Žádné komentáře

Abus FU9001 Privest Wireless Alarm Base Set Installatio Uživatelský manuál Strana 73