Abus CASA30400 Uživatelská příručka stáhnout pdf (Strana 33)

English

7.3.1 Doorbell event

Sequence of doorbell ringing:

1. Doorbell is pressed on the video door station.

2. The screen on the Eycasa main unit is activated.

3. RELAY2 on the door station is switched for 2 seconds to activate the door bell.

4. The live image of the video door station is displayed.

5. Video recording is started on the video door station and continues for up to 30 seconds

(if the “Activate video recording” option was selected in the settings).

6. The doorbell tone plays.

7. The event message is displayed on the screen.

8. At the same time, the video image and a doorbell signal are sent to the CASA30300

handset (optional).

Possible user actions on the

handset

Effect

Acknowledge the event message The doorbell ringing is interrupted.

After the event message is acknowledged, the

and

buttons can be pressed.

Press the button

The event message is acknowledged and the doorbell ringing

ends.

An active voice connection for the video door station is

established and maintained for up to 60 seconds.

Press the button

The event message is acknowledged and the doorbell ringing

ends.

Press the door opener (RELAY 1) on the video door station.

No response Doorbell ringing stops after 30 seconds.

Video connection is disconnected after 30 seconds unless

“Camera permanently active” has been selected.

The “Missed Door Bell” event message is saved on the main

unit.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 53 54

Žádné komentáře

Abus CASA30400 Uživatelská příručka Strana 33