Abus FUBW50020 Uživatelský manuál Strana 26

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 110
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 25
26
Screw the device to the wall and make sure that the
anti-removal wall contact is positioned correctly and the
switch is closed. [Fig. 4]. For mounting, two spare
clamping feet are provided. One is 1 mm, the other one
is 2 mm away from the original one. This plug
connection can be removed by gently pulling the pin.
[Fig. 2] When changing the electronic module, always
make sure that the LED is facing forwards to ensure
the sensor is aligned correctly. [See section “Aligning
and masking”]
When the detector is correctly positioned and installed, replace the front cover and lock it
as shown. [Fig. 5]
Fig. 2
Fig. 5
Zobrazit stránku 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 109 110

Komentáře k této Příručce

Žádné komentáře