Abus FU8030 Secvest 2WAY Ethernet Module Uživatelský manuál stáhnout pdf (Strana 13)

13

are pinched and bolt the housing onto the

wall mounting plate.

Programming

If the IP module was detected by the centre,

a display appears in the Secvest user menu

under “System Options

 About Comm”:

Comms: PSTN, Ethernet.

IP Address: xxx.xxx.xxx.xxx

IP Subnet: xxx.xxx.xxx.xxx

IP Gateway: xxx.xxx.xxx.xxx

MAC: yy-yy-yy-yy-yy-yy

Now select the menu item “IP Network” in

setup mode. Program the 4 submenu items

as described below.

IP address:

Enter the IP address you wish to provide the

alarm centre (your own IP address). The IP

address consists of four groups. Each group

is three digits long and separated from the

next group by a “dot”, e.g.

“192.168.000.001”. Press “*” to enter the dot.

Note: If you leave this field blank, the

wireless alarm centre uses DHCP (Dynamic

Host Control Protocol) to obtain the IP

address from the DHCP server.

IP port no.

Enter the port number. This is the port that

the alarm centre “listens to” if a software

application tries to establish a connection to

the alarm centre via the Internet. The format

is a number which can be up to 5 digits long.

The default port is 55132.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 48 49

Komentáře k této Příručce

Žádné komentáře